Faster Memory Lifts Mini PC Graphics 18.7%
Soldered LPDDR5X-8000 gives the ACEMAGIC F5A a graphics edge, but the memory cannot be upgraded later.
Updated on Nov. 5, 2026 in Computers

ETA Prime tested the ACEMAGIC F5A mini PC, which uses 32GB of soldered LPDDR5X-8000 memory, and found its Radeon 890M integrated graphics scored 18.7% higher in 3DMark Time Spy than systems using DDR5-5600. The F5A is a shipping product listed for $1,299 in the US and €998 in Europe, and the reported gains come from one reviewer's testing rather than an independent benchmark suite.
Why it matters
The result shows that memory bandwidth, not only processor design, can set the graphics ceiling of a small integrated-GPU machine. Because the F5A's memory is soldered to the board, the speed advantage comes with a trade-off in upgradability that the company sells separately.
The test compared 32GB of LPDDR5X-8000 memory, which offers 128 GB/s of theoretical bandwidth, with dual-channel DDR5-5600 at 89.6 GB/s, and the Radeon 890M graphics score rose 18.7% in 3DMark Time Spy. The reported gain was concentrated in graphics, with CPU results showing a smaller difference, and the source does not report results from other reviewers or independent labs.
The players
ETA Prime
A hardware reviewer and benchmarking channel that tests PC components, including integrated-graphics mini PCs, using standardized game and synthetic benchmarks.
ACEMAGIC
A mini PC manufacturer that builds compact systems around AMD Ryzen processors, offering versions with soldered LPDDR5X memory and versions with upgradeable DDR5 SO-DIMMs.
The details
Integrated graphics share the same system memory as the processor, so their performance depends heavily on how much data the memory can move each second. LPDDR5X is a low-power memory standard that can run at higher speeds than the DDR5 modules common in mini PCs, and soldering it directly to the board removes the slots that normally allow upgrades. The F5A BIOS allows memory speeds up to 8533 MT/s, but the testing was performed at the default 8000 MT/s setting.
Timeline
Article published 4 November 2026 on ETA Prime's ACEMAGIC F5A memory test results.
F5A BIOS settings allow memory speed up to 8533 MT/s, while testing used the 8000 MT/s default.
The Tech Race
The F5A's faster memory is a configuration choice that sits alongside ACEMAGIC's own cheaper F5A version, which keeps upgradeable DDR5 SO-DIMMs and does not use the faster memory. The comparison places soldered high-speed memory against the replaceable DDR5-5600 modules used across most HX 470 mini PCs.
Buyers who choose the soldered-memory F5A get the faster graphics result at a fixed memory size, while those who need to upgrade RAM later should consider the separate DDR5 SO-DIMM version. The $1,299 US and €998 European prices apply to the 32GB, 1TB configuration reported in the source.
The takeaway
Memory speed is becoming a deciding factor for integrated graphics in small PCs, so watch for independent reviews that repeat the F5A's 18.7% gain across more games and test setups. Check whether the company updates the F5A BIOS to unlock the 8533 MT/s speed setting, which the reported testing did not use.
Further reading
For more on how components like these change desktop and laptop performance, see the Computers section.
Source note: This article includes information reported by VideoCardz.


