Carbon Fiber PEBA Filament Stiffens Flexible 3D Prints
Xenia's 15% carbon fiber grade is commercially launched now, with independent performance data still to come.
Updated on Nov. 5, 2026 in Materials Science

Xenia Materials launched XECARB PEBA-CF, a filament reinforced with 15% carbon fiber, at Formnext 2026. The product is a commercially launched FFF/FDM filament, not a research-stage material.
Why it matters
Flexible PEBA elastomers are useful in parts that bend and absorb energy, but they often lose geometric stability under load. Adding carbon fiber to the PEBA matrix targets that limitation, extending printable elastomer-class materials into structural applications.
The manufacturer reports a density of 1.08 g/cm³ and a heat deflection temperature of 105°C for the 15% carbon fiber grade. The source offers no comparator against unfilled PEBA or independent test data to verify these values.
The players
Xenia Materials
A compounder headquartered in Vicenza, Italy, whose 3DF Materials line now spans seven filaments including PEBA, PA11, PETG and PPA grades.
The details
PEBA (polyether block amide) is a thermoplastic elastomer, a material that combines a rigid crystalline phase with a soft rubbery phase. In XECARB PEBA-CF, short carbon fibers are dispersed through this matrix, where they stiffen the material while the elastomeric phase continues to handle toughness and elastic recovery. The filament is designed for fused filament fabrication (FFF), also called fused deposition modeling (FDM), in which molten plastic is extruded layer by layer to build a part.
Timeline
Xenia supplied carbon fiber-reinforced polycarbonate tooling for the O.L.I.V.I.A. drone earlier in 2026.
The XECARB PPA-CF grade, a 20% carbon fiber product, launched in April 2026.
XECARB PEBA-CF launched at Formnext 2026 on November 5, 2026.
The Tech Race
The launch extends Xenia's 3DF Materials line, which already includes an unreinforced PEBA grade (XELIGHT PEBA), a bio-based PA11 with 15% carbon fiber, and a recycled PETG with 20% recycled carbon fiber. The source does not name a competing filament maker's reinforced elastomer product for direct comparison.
The filament is available for FFF/FDM printing now, though the source gives no pricing or distributor details. Engineers printing flexible parts that must also hold shape under load would be the first to test whether the reinforcement delivers the stiffness the datasheet implies.
The takeaway
Watch for independent mechanical test data on XECARB PEBA-CF, which would show whether the 15% carbon fiber loading measurably improves stiffness over unfilled PEBA. Reader-side, check the datasheet's stated temperature and density figures against your own print trials before using the material in load-bearing parts.
Further reading
For broader context on the composites used in this launch, explore Materials Science.


