FR3 Phased Arrays Hit 1.7 Gbps in 6G Tests

Pegatron and Rohde & Schwarz show prototype 13 GHz and 15 GHz hardware for 6G, with no commercial timeline yet announced.

Updated on Nov. 5, 2026 in Telecommunications

Isometric editorial illustration of a flat grid antenna panel on a stand, linked by cables to a compact dark analyser on a clean lab bench.
Rohde & Schwarz and Pegatron demonstrated a dual-polarised FR3 phased-array antenna reaching 1.7 Gbps at the 6G Summit in Taipei, with no commercial timeline announced. AI Illustration. Upload story photo >

Rohde & Schwarz and Pegatron demonstrated a dual-polarised FR3 phased array antenna for MIMO transmission at the 6G Summit in Taipei, Taiwan. The exhibition setup projected a 1.7 Gbps data rate, while a separate indoor test reached a peak expected 1.4 Gbps across 40 meters. These are demonstrations, not commercial products; the work is at the research and prototype stage.

Why it matters

FR3, the spectrum roughly between 7 and 15 GHz, is expected to supply the additional bandwidth that 6G systems will need. Testing at 13 GHz and 15 GHz shows the hardware path toward those bands is being explored, though no deployment timeline was given.

The demonstrations measured dual-stream MIMO transmission at 13 GHz and 15 GHz with 100 MHz channels, using 4096 QAM in the exhibition setup and 1024 QAM in the indoor test. The figures are projections and peak expected rates from controlled setups, and the source does not provide independent field validation.

The players

Rohde & Schwarz

A German test-and-measurement company whose FSWX signal and spectrum analyser and R&S SMW200A vector signal generator were used in the FR3 tests.

Pegatron

A Taiwanese electronics manufacturer that developed the dual-polarised FR3 phased array antenna and is building 13 GHz/15 GHz and 7 GHz/8 GHz array modules for Massive MIMO.

The details

A phased array antenna steers its beam electronically by adjusting the phase of signals sent through many small elements, avoiding mechanical movement. MIMO (multiple-input, multiple-output) uses several antennas to send several data streams over the same channel at once, and dual polarization adds a second orientation of radio wave on top of that. The Rohde & Schwarz FSWX signal and spectrum analyser analysed multiple channels in parallel, replacing the separate horizontal and vertical adjustments a conventional analyser would require. QAM (quadrature amplitude modulation) encodes more bits per symbol at higher orders such as 1024 and 4096, which raises throughput when signal quality is good enough to support it.

Timeline

  1. The demonstration took place at the 6G Summit in Taipei, Taiwan; the source does not give the exact date.

  2. The article reporting the demonstration was published on eletimes.ai on November 5, 2026.

The Tech Race

Pegatron's 13 GHz and 15 GHz work sits alongside its in-development 7 GHz and 8 GHz Massive MIMO modules, showing a hardware push across several mid-band and upper-band frequencies. The companies present FR3 as a 6G spectrum candidate, but the source does not compare these results against competing vendors' FR3 hardware.

Nothing in the demonstration is available to consumers; the antenna and FR3 hardware remain at prototype stage. Availability, pricing and timing for commercial 6G devices using these bands were not announced.

The takeaway

Watch for whether Pegatron and Rohde & Schwarz publish field measurements or a commercial FR3 module timeline in the coming months. Confirmation of 6G standardization decisions on FR3 spectrum would indicate whether these prototypes move toward deployment.

Further reading

For background on the spectrum and standards driving these tests, explore the Telecommunications section.