Open-Source RISC-V Computer Runs on FPGA Board

The M9B shows a full computer can run on reconfigurable hardware, though its performance has not been benchmarked.

Updated on Nov. 5, 2026 in Computers

Close view of a bare green circuit board with a square black chip and gold contact pads on a grey workbench, with a microSD card beside it.
The-parts-bin released the M9B, an open-source computer that runs a RISC-V processor inside an FPGA board, though its performance has not been benchmarked. AI Illustration. Upload story photo >

The-parts-bin has released the M9B, an open-source computer built on an FPGA board, a programmable chip that can be configured to act as a processor. The M9B runs a RISC-V processor, an open instruction-set design, implemented inside the FPGA. The project is shipped as open-source software and hardware resources, not as a commercial product line.

Why it matters

The release shows how far open instruction-set designs can go when a full computer is built from reconfigurable logic rather than fixed silicon. It points toward a trend in which hobbyists and researchers can assemble working machines from open designs on inexpensive development boards.

The M9B pairs a VexiiRiscv processor, an open-source RISC-V CPU, with 8MB of on-package PSRAM memory on the Sipeed Tang Nano 9K board, which is built on the Gowin GW1NR-9 FPGA. Its 36MHz clock, 720 × 480 HDMI video output and 48kHz audio are the published specifications, while no performance benchmarks have been reported.

The players

The-parts-bin

An independent open-source project maker that released the M9B computer as a RISC-V system on an FPGA board.

Sipeed

A Chinese maker of low-cost development boards, whose Tang Nano 9K board serves as the M9B's hardware platform.

Gowin Semiconductor

A Chinese FPGA manufacturer whose GW1NR-9 device powers the Tang Nano 9K board used by the M9B.

The details

The M9B is built by implementing an open-source RISC-V processor inside an FPGA, a chip whose internal circuits can be rewired through a hardware description. The FPGA is mounted on the Tang Nano 9K development board, and the processor runs at 36MHz with 8MB of PSRAM, a type of fast memory built into the chip package. The project repository includes boot firmware, runtime components and tools that prepare a microSD card with the software, which supports the games Doom, Descent, Tyrian, System Shock and Ultima VII.

The Tech Race

The M9B places an open RISC-V design alongside proprietary processor cores and commercial single-board computers on low-cost FPGA hardware. It is a hobbyist-scale demonstration rather than a competing commercial product, and the source gives no comparative performance data.

The M9B is available now as an open-source project for builders who have the Tang Nano 9K board and a microSD card. Availability beyond the project's own release, pricing and any wider distribution were not stated in the source.

The takeaway

Watch whether the M9B project publishes benchmark figures against existing small RISC-V boards, since performance numbers would show how practical FPGA-hosted computers are. Note also whether the same approach appears on other low-cost FPGA boards in the coming months.

Further reading

For background on the hardware architectures behind projects like this, see our Computers coverage.

Source note: This article includes information reported by Electronics For You - Official Site ElectronicsForU.com.