Retrofit Blade Could Extend Ageing MM92 Turbines

A certified load baseline for the Senvion MM92 supports a blade swap that is still in commercial preparation, not yet available.

Updated on Nov. 6, 2026 in Energy

Long white composite wind turbine blade lying across grassy upland ridge with distant turbines softly out of focus under overcast sky.
UL Solutions has certified the load model of the Senvion MM92 wind turbine, supporting ACT Blade's ACT100 retrofit blade for commercial preparation. AI Illustration. Upload story photo >

UL Solutions has issued a Load Component Certificate for the Senvion MM92 wind turbine, covering its load simulation model under IEC 61400-1 Edition 3 Amendment 1. The certification is part of ACT Blade's effort to prepare its ACT100 retrofit blade for commercial deployment, and the work is at the commercial preparation stage rather than in routine operation.

Why it matters

The certificate gives an independently certified reference for MM92 loads in its original configuration, which is a prerequisite for swapping in a new blade on an existing machine. It sits within a broader push to extend the life of ageing wind assets through blade replacement instead of full turbine replacement.

The certificate covers the MM92 load simulation model under IEC 61400-1 Edition 3 Amendment 1, which defines the design loads a turbine must withstand. The ACT100 blade is 49.2 metres long and is built for the Senvion MM92 2 MW platform, combining higher aerodynamic performance with lower structural mass, though the stub provides no measured performance comparators.

The players

UL Solutions

UL Solutions is a global testing and certification company that issues independent certifications for engineered products, including wind turbine components.

ACT Blade

ACT Blade is a blade developer whose ACT100 retrofit blade is designed to upgrade existing Senvion MM92 turbines.

Senvion

Senvion is a wind turbine manufacturer whose MM92 2 MW platform is the basis for the retrofit blade.

The details

The MM92 certificate confirms that the turbine's load model has been independently checked against the international design standard for wind turbine loads, which sets the forces the structure must survive over its service life. ACT100 is a retrofit blade, meaning it replaces the existing rotor blades on a turbine that is already installed rather than requiring a new machine. Because the load baseline is now certified, a prospective owner can assess whether a replacement blade stays within the original design envelope at a given site. The 49.2-metre length is the principal dimension that matters for that assessment.

Timeline

  1. Article on the MM92 certificate was published on 6 November 2026.

The Tech Race

The retrofit approach competes with full turbine replacement, which is the default route for upgrading ageing wind farms. Certification of load models is what allows component-level upgrades to be evaluated against the same standard that governs new turbines.

Owners of ageing MM92 wind farms could gain an alternative to full turbine replacement, though the stub gives no commercial availability date or pricing. The practical benefit depends on individual site evaluation, which the certified load baseline and ACT100 Design Conformity Statement are intended to support.

The takeaway

The retrofit route could change how operators of ageing wind fleets plan repowering. Watch for the first commercial ACT100 installation on an MM92 turbine and for any published performance data that confirms the aerodynamic and mass gains.

Further reading

For broader context on how these upgrades fit into the sector, explore the Energy section.

Source note: This article includes information reported by Windtech-international.