New Reactive Polyetherimide Enabled SLS 3D Printing
The xPEI material uses controlled thermal curing to overcome historic limitations in high-performance polymer printing.
Updated on Oct. 6, 2026 in Materials Science

Live Poll
Is now a good time to adopt new high-performance materials for your production needs?
BlueSky Polymers, Insight Polymers, and ALM have developed xPEI, a new reactive polyetherimide material capable of being used in selective laser sintering (SLS) 3D printing. The material is currently available for use as a reusable powder for SLS and as a filament for fused deposition modeling (FDM).
Why it matters
The development overcomes high melt viscosity and poor interlayer diffusion that previously rendered traditional PEI unsuitable for SLS printing. This allows for the production of complex geometries that are traditionally difficult to achieve with injection molding or subtractive manufacturing.
The xPEI material utilizes a Sabic Ultem backbone engineered to flow during initial processing before undergoing a controlled thermal cure. This post-processing step increases the glass transition temperature, overcoming the limited interlayer adhesion typical of high-performance PEI.
The players
BlueSky Polymers
A startup originating from the University of North Carolina at Chapel Hill focused on polymer materials science.
Insight Polymers
A Tennessee-based firm specializing in polymer manufacturing with a combined 100 years of industrial experience.
ALM
A Temple, Texas-based subsidiary of EOS Group founded in 2004 that specializes in additive manufacturing materials.
The details
The material is designed to exhibit low melt viscosity during the laser sintering process, allowing for the precise deposition of layers. A subsequent thermal treatment triggers a chemical reaction that bonds the layers, creating structural integrity that was previously impossible in SLS printing. This process enables the creation of complex parts that are otherwise unreachable via standard injection molding or subtractive manufacturing techniques.
Timeline
2004: ALM was founded in Temple, Texas.
September 28, 2026: Theo Dingemans presented xPEI at the ICAM forum.
The Tech Race
This development extends the utility of the Sabic Ultem backbone by adapting it for the laser-based processing landscape. It signals a shift toward making high-performance thermoplastics compatible with SLS, directly challenging the dominance of traditional materials in complex industrial printing.
Industrial manufacturers can now source xPEI for SLS and FDM printing applications as the companies currently seek early pilot customers. This development primarily changes workflows for engineers requiring complex parts that exceed the capabilities of current injection molding processes.
The takeaway
The partnership has successfully transitioned reactive polyetherimide from research to multi-kg production capability. Interested parties should monitor the companies as they announce pilot program results and formalize supply chain scaling.
Further reading
Explore more developments in Materials Science to see how high-performance polymers are evolving.
Live Poll
Is now a good time to adopt new high-performance materials for your production needs?





